Ultrasonic Pulse Velocity - Pundit PL-200, PL200-PE

Ultrasonic Pulse Velocity - Pundit PL-200, PL200-PE

(1 đánh giá)

Proceq - Thụy Sỹ

12 tháng

The Pundit PL-200 is a best-in-class Ultrasonic pulse velocity (UPV) test instrument to examine the quality of concrete and other materials such as rock, wood and ceramics. It provides an extended range of measurement modes and superior features for on-site testing: Assess the concrete uniformity using standard A-Scans and the new Line Scan functionality, estimate the compressive strength of concrete or measure the surface velocity and the depth of perpendicular cracks. The intelligent softwar

0966.24.9996

Applications
Pundit PL-200 Pundit PL-200PE
Through Transmission: 
Access from two sides
Pulse Echo: 
Single side access
Assessment of Concrete Quality
Ultrasonic Pulse Velocity
Uniformity
Compressive strength and SONREB Slab thickness from a single side
Determination of crack depth Detection and localization of voids, pipes, cracks (parallel to surface), and honeycombing
Modulus of elasticity
Scan Modes
A-Scans
Line Scans
A-Scans
B-Scans

Technical Data
  Pundit PL-200
Pundit PL-200PE
Range 0.1 – 7930 μs
Resolution 0.1 μs (< 793 μs), 1 μs (> 793 μs)
Display 7” colour display 800x480 pixels
Pulse Voltage UPV 100 – 450 Vpp
Pulse Voltage UPE - 100 – 400 Vpp
Bandwidth 20 – 500 kHz
Receiver Gain 1x – 10’000x (0 – 80dB) [11 steps]
Memory Internal 8 GB Flash memory
Regional Settings Metric and imperial units and multi-language supported
Battery Lithium Polymer, 3.6 V, 14.0 Ah
Battery Lifetime > 8h (in standard operating mode)
Operating Temperature 0°C – 30°C (Charging, running instrument)
0°C – 40°C (Charging, instrument is off)
-10°C – 50°C (Non-charging)
Humidity < 95 % RH, non condensing
IP Classification IP54
 
Accessories
  50 kHz Pulse Echo Transducer
The Pulse Echo transducer is a shear wave transducer designed for single-handed and two-handed operation. It is particularly suited to testing where access is limited to a single side.
 

Standard 54kHz Transduser
A new design with improved performance to increase range and stability.

  150kHz Transducers
These transducers have more resolution, but a decreased range. For use on fine grained samples.
  250kHz Transducers
These transducers have more resolution, but a decreased range. For use on fine grained samples.
  54kHz Exponential Transducers
For use on rough surfaces without couplant. When used in combination with Pundit Lab+ no external amplifier is required.
 

500kHz Transducers
For use with fine grained materials, such as rock and ceramics.

  250kHz Shear Wave Transducers
For use in combination with standard P-wave transducers to measure the dynamic elastic modulus of the material under test.
  Transducer Holder
Particularly useful for compound measurements such as surface velocity or crack depth.

Đánh giá sản phẩm

Bình chọn sản phẩm:

Bình luận

Sản phẩm cùng loại

Top

   (0)
1
Bạn cần hỗ trợ?